Articles, Blog

Jeep Wrangler JL 4-Door Barricade Tubular Rock Sliders Review & Install

Jeep Wrangler JL 4-Door Barricade Tubular Rock Sliders Review & Install

Hey, guys. It’s Sara with and today,
we have a review and install of the Barricade Tubular Rock Sliders fitting your ’18 and
newer Jeep Wrangler JL four-door. These sliders feature a heavy-duty tubular
stainless steel construction with a textured black powder coat finish. These rock sliders provide protection to your
Jeep without sacrificing ground clearance because they don’t have a bar underneath like
you see with some other rock sliders. They also double as a step for easy entry
with their gusseted step pad. Coming in at around $320, these are middle
of the road price-wise, but you are getting the durability and clearance of the slider
with the convenience of a step which comes in handy, especially if your Jeep is lifted. I’m giving this install one out of three wrenches
on the difficulty meter. These sliders feature a direct bolt up install
with no drilling required and can be done in approximately two hours. With that said, let’s jump right into our
install. For this install, we used: An impact gun and
an 18-millimeter socket. All right. So, the first step in our install is to remove
the three body bolts that are gonna hold on our rock slider. Grab an 18-millimeter and let’s get these
out. So, for the back two mounting points for our
rock slider, we will reuse the factory hardware. However, for the front, we’re gonna need to
use the hardware that they’ve provided. Before you install your rock slider, grab
this metal spacer and just slide it right in the front bracket. Now, we can get these installed. So, if this metal washer with this rubber
sleeve on the outside fell off of your front mounting point, you will need to reinstall
this as well. So, just set it in the bracket for your step
with the rubber facing upwards so you can get it reinstalled. Using the provided hardware, get it through
both the factory and our spacer that’s included in the kit and then get it threaded up into
the body of the Jeep. With an-18 millimeter socket, tighten this
down. Reinstall the other two body bolts. Grab an 18-millimeter socket and tighten these
down. Repeat that process on the other side. All right. That is gonna do it for the review and install
of our rock sliders. Remember, for all things Jeep, keep it at

Tagged , , , , , , , , , , , , , , , , , , , , , , ,

1 thought on “Jeep Wrangler JL 4-Door Barricade Tubular Rock Sliders Review & Install

  1. Shop these Barricade Tubular Rock Sliders:

    Subscribe for Daily Jeep Videos:

Leave a Reply

Your email address will not be published. Required fields are marked *